Susanne
This action may take several minutes for large corpora, please wait.
doc#121 high builder<sol>active ratio. </p><p> Hard- surface cleaning in household application is represented
doc#121 present in sufficient amount in a hard- surface cleaning formulation. Hydroxides, orthophosphates
doc#121 between the requirements for textile and hard- surface cleaning. Exclusive of esthetic values,
doc#121 differentiation between soft- and hard- surface cleaning lies in the magnitude and kind
doc#121 cleaning are not nearly as complex. In hard- surface cleaning, the inorganic salts are more
doc#121 importance of the inorganic constituents in hard- surface cleaning has been emphasized in a number
doc#121 important inorganic ingredients of hard- surface cleaners. In addition, the polyphosphates
doc#121 in practice. </p><p> The problems of hard- surface cleaning are not nearly as complex. In
doc#121 builders. In addition, many of the hard- surface cleaners used for walls and woodwork had
doc#121 now also contain phosphates. These hard- surface cleaners are discussed in Chapter 28. THE
doc#121 tensions of the water phase are reduced by a surface -active agent. </p><p> The washing process
doc#121 an oil cannot be replaced by water on a surface unless the interfacial tensions of the
doc#121 particle will be very strongly attracted to a surface exhibiting an opposite charge. In addition
doc#118 difficulty of measuring the characteristic anode surface temperature (see below) since only a small
doc#118 Assuming thermal equilibrium between the anode surface and the transpiring argon, the gas enthalpy
doc#118 Ref. 7. The radiation loss from the anode surface was computed according to <formul> where
doc#118 higher temperature than the rest of the anode surface changed size and location continuously.
doc#118 for simultaneous measurement of the anode surface temperature and the temperature distribution
doc#118 voltages. Simultaneously with the anode surface temperature and voltage measurements pyrometer
doc#121 chemical reactivity. Spring used a Brush surface -analyzer in a metal-cleaning study and