Susanne
This action may take several minutes for large corpora, please wait.
doc#118 the characteristic anode surface temperature (see
doc#118 of the anode surface changed size and
doc#118 To measure the surface temperature of the
doc#118 plug, the surface was scanned with
doc#118 rest of the surface had a temperature
doc#118 temperature of the surface was then computed
doc#118 between the anode surface and the transpiring
doc#118 with the measured surface temperatures and arc
doc#118 with the anode surface temperature and voltage
doc#118 along the cylindrical surface of the carbon
doc#118 temperature of the surface of <formul>.
doc#118 compared with the surface temperature of the
doc#118 the surrounding metal surfaces should also be
doc#118 of the metal surfaces and of the
doc#118 from the anode surface was computed according
doc#119 blocks with flat surfaces held apart by
doc#119 : (<bital>A<eital>) The surface tension is uniform
doc#119 uniform on the surface of the drop
doc#119 pressure exerted by surface tension in a
doc#119 pressure exerted by surface tension on a