This action may take several minutes for large corpora, please wait.
doc#118 | rest of the anode surface changed size |
doc#118 | surface of the anode holder. In |
doc#118 | temperature of the anode plug, the |
doc#118 | temperature of the anode holder, to |
doc#118 | impinging on the anode . This energy |
doc#118 | disk surrounding the anode holder to determine |
doc#118 | loss through the anode holder included also |
doc#118 | rise through the anode was calculated according |
doc#118 | transpiration through the anode . The third |
doc#118 | arc to the anode was partly fed |
doc#118 | arc to the anode could be reduced |
doc#118 | cathode to the anode ). Hence |
doc#118 | connected to the anode and cathode holders |
doc#118 | strike to the anode holder instead of |
doc#118 | transfer to the anode is due to |
doc#118 | transfer to the anode in free burning |
doc#118 | transfer to the anode for a given |
doc#118 | transferred to the anode giving rise to |
doc#118 | transferred to the anode by applying gas |
doc#118 | transferred to the anode by the above |