Susanne
This action may take several minutes for large corpora, please wait.
doc#121 importance of the inorganic constituents in hard- surface cleaning has been emphasized in a number
doc#121 high builder<sol>active ratio. </p><p> Hard- surface cleaning in household application is represented
doc#121 differentiation between soft- and hard- surface cleaning lies in the magnitude and kind
doc#121 particle will be very strongly attracted to a surface exhibiting an opposite charge. In addition
doc#117 not nearly so sensitive to differences in surface features. Such high-resolution observations
doc#118 region was estimated by eye. The rest of the surface had a temperature which decreased towards
doc#101 different reality behind the facade? Does the surface hide a quite different picture? </p><p> The
doc#121 permanently or temporarily sorbed on the surface in place of the soil will tend to accelerate
doc#121 cleaning lies in the magnitude and kind of surface involved. One gram of cotton has been found
doc#121 the soiled objects is mechanically held by surface irregularities to some extent. However,
doc#119 <formul>, the pressure exerted by any curved surface is <formul>, where <ggr> is the interfacial
doc#117 the very low thermal conductivity of the surface layer which was derived from the variation
doc#117 the structure or composition of the lunar surface material. </p><p> The radio emission of a
doc#118 indicated an equilibrium temperature of the surface of <formul>. This temperature was taken
doc#129 (1), the image of this pencil is a ruled surface of order <formul> which is met by the plane
doc#129 g as vertex is transformed into a ruled surface of order <formul> having <formul> generators
doc#129 generators concurrent at P. Since a ruled surface of order n with n concurrent generators
doc#118 <fra116> inch between the plate and the surface of the anode holder. In addition, the inner
doc#118 the anode holder. In addition, the inner surface of the carbon shield was covered with aluminum
doc#118 readings were taken along the cylindrical surface of the carbon anode holder as indicated